When searching for a solution to working water quality or just for aesthetic improvement, there are some fundamental kinds of lake and pond aerators to look like air diffused systems, surface spray aerators and horizontal aspirators. Each model contains special differences and efficiencies that can be availed in several various methods to attain optimum benefit. There are some recommendations to consider when choosing and placing an aeration system. The shape and size of the lake must say the kind of aeration system or a mixture of systems to be availed. Remember when the quality of water is your goal; suggested sizing for a pond aerator pump is 2HP surface acre. You can consider surface spray systems for the ponds that is below fifteen feet deep, or fountain spray aesthetics are favorable. For ponds that is fifteen feet and more in depth and when you do not want to use surface spray, you can look diffused aeration system.
Methods of securing units:
Aspirators and mixers are used if the ponds is less than nine feet deep. To run the systems properly and without any noise, it will be required to understand when enough amount of power is available, whether there are some electrical needs that may be using the source and how close it is to the source like lighting, irrigation etc. It is also essential to look local and national electrical standard at the time of installing it , that will always need trenching or burying wire in conduit from the powerful material to the aerators control center. Getting operational electricity is required prior flotation and beginning the aeration system for mechanical and security consideration and may turn a scheduling thinking that can require focus. A licensed electrician may also be needed at the time of installation. There are different methods of protecting units into position, mooring and anchoring.
Systems of quality of materials and securing availed can affect protection, safety and ease of service and must be added in the process of planning. Materials and tools need, can be like a shovel, stainless steel, conduit, cinder blocks, nylon rope, rebar, a boat. Diffused air systems do not need a mooring or anchoring, but a boat is always needed at the time of installing it. Intensive landscaping on the pond like waterfalls, retaining walls and planting beds can affect the installation work, along with this future available access for maintenance or service. Extra coordination may be required between the aeration installer and irrigation contractor.
Health and environment problems:
The main purpose of placing a lake or pond aeration system is to create the levels of dissolved oxygen and the water column temperatures turn steady. At the time of warm months or days, there can be a huge algae development in the water that is part of the landscape. By having great aeration systems, these can be avoided from developing and spreading quickly. If the condition of the water becomes poor, this will change into hazy and dim. Along with these, health problems and the environment issues can also happen. So there is actually a requirement for a good and regular circulation in a landscape that features a lake. Unlike the truth that the sign of low oxygen can be in a way of bad smell, muck, algae growth and poor water condition, the actual problems is linked to the presence of huge levels of nutrients and low amount of dissolved oxygen’s.
Lake aeration importance:
There are other solutions in removing algae such as availing copper sulphate still this will not work with the actual cause of the issue. Pond aeration does not kill the growth of algae, but instead create the condition of water that is not perfect for this organism to grow and live. On the occasion that the amount of dissolved oxygen is where it must be, the bacteria will develop and spread. These bacteria will rob the algae of the nutrients that they require to develop because the bacteria will eat the nutrients fast. These bacteria will be the food for the fishes; this is the main reason why an aeration system is very important. It is also vital to note that the purpose of these systems is not confined to air circulating in the water only. This is a necessary process because this will be like a barrier for water management and environment.